分享好友 资讯首页 频道列表

with marine airbags Ferryboat Launching in Tunis

2011-06-08120

Ferryboat Launching
950 Ton newly constructed Ferry by Societe De Constructions Industrielles Et Navales was to be launched in Sfax, Tunisia.

After an initial study of various methods of ship launching, Evergreen Marine Airbags proved to be the pioneering and promising technology for this launch.

ISEAS being a representative of Evergreen-Maritime in Middle East, Africa and India Region, was pleased to get this opportunity to do a technical feasibility study for the launching of this newly constructed Ferry.

At an initial stage, ISEAS’ representative carried out technical feasibility study by personally visiting the site. Various aspects of launching the ferry with Evergreen marine airbags were considered and discussed in detail.

Considering the shape of the bottom of the ferry, V shaped hull, it was critical to choose the right size of airbags as well as to design the slip way appropriately. The size of Evergreen Marine Airbags to be used was advised after a careful and systematic study. Accordingly the slip way angle was suggested.


It was also noted that this Ferry was constructed on a flat ground in Tunisia. Fortunately the flexibility of airbags proved remedy to this practical limitation; the slope could be created by adjusting the inner air pressure of the Evergreen Marine Airbags.

With all the necessary recommendation a complete report was submitted by ISEAS in order to ensure the safe and certain launch with this technology.

Prelaunch Preparatory and Evergreen Marine Bags Inspection was carried out at an intermediate stage. ISEAS’ engineer effectively pressure tested all the Evergreen Airbags and inspected all other pre launching preparation.

Finally on 26th of May 2010, Vessel was ready to be launched with Evergreen Airbags Technology and as anticipated after all the necessary preparation under the supervision of ISEAS personnel, Mr. Krishan Kumar, the vessel glided into the water effortlessly as expected. The launch was Successful.

ISEAS is pleased to represent Evergreen Marine Airbags in Middle East, Africa and India region and it strives to continue launching more vessels using this Innovative & Safe Technology.

 

Ferryboat Launching by Marine Airbags

反对 0
举报 0
收藏 0
打赏 0
南通中集太平洋8200立方米LNG加注船用气囊上排下水吉水接水成功
2023年3月22日,由中集太平洋海工为意大利船东建造的8200立方米LNG加注船首制船(S1058)在江苏南通海工船舶工业园中集太平洋海

0评论2023-03-241

浙江新洲造船22500吨散货船"海豚103"轮气囊下水成功
2022年12月25日上午,浙江新洲造船22500吨散货船海豚103轮气囊下水成功

0评论2022-12-250

湖北枝江华瑞船舶"联顺152"船气囊上排下水吉水顺利完成
2022年12月5日 ,湖北枝江华瑞船舶制造有限公司,联顺152船用气囊上排下水吉水顺利完成

0评论2022-12-050

网上青岛船用气囊护舷靠球工厂这么多,如何避免进坑
网上青岛船用气囊护舷靠球厂家这么多,终端客户及贸易公司如何练就火眼金睛,巧妙避坑呢在青岛地区,生产船用气囊护舷、载重气囊

0评论2022-09-053

海油工程陵水25-1气田项目深水浮球采购数量和要求
1. 浮球可长时间处于2000m水深工作状态,外形及净浮力保持不变,持续有效工作时间不小于30天;2. 浮球外形为球体形状,实心填充

0评论2022-08-228